Band tail state related photoluminescence and photoresponse of ZnMgO solid solution nanostructured films

• Vadim Morari,
• Aida Pantazi,
• Nicolai Curmei,
• Vitalie Postolache,
• Emil V. Rusu,
• Marius Enachescu,
• Ion M. Tiginyanu and
• Veaceslav V. Ursaki

Beilstein J. Nanotechnol. 2020, 11, 899–910, doi:10.3762/bjnano.11.75

• of the alloy composition. Thin films were also prepared by aerosol spray pyrolysis deposition using the same sol–gel precursors for the purpose of comparison. The prepared films were tested for photodetector applications. Keywords: aerosol spray pyrolysis deposition; energy band tails; photodetector

Semi-automatic spray pyrolysis deposition of thin, transparent, titania films as blocking layers for dye-sensitized and perovskite solar cells

• Hana Krýsová,
• Josef Krýsa and
• Ladislav Kavan

Beilstein J. Nanotechnol. 2018, 9, 1135–1145, doi:10.3762/bjnano.9.105

• properties that were not influenced by post-calcination. These results will surely find use in the fabrication of large-scale dye-sensitized and perovskite solar cells. Keywords: blocking films; FTO; solar cells; spray pyrolysis deposition; titanium dioxide; Introduction Dye-sensitized solar cells (DSSCs

• upscaling, spray pyrolysis deposition (SPD) is the most practical option for the fabrication of solar cells. 120–200 nm thick, compact, TiO2 layers were found to be optimal for SSDSSCs [12]. The same layers (with optimized thickness of 30–35 nm) turned out to be useful for PSCs, where they clearly

• unperturbed blocking utility of our calcined films is shown here for the first time. Furthermore, good blocking is observed for calcined films, which are similar or thinner than those reported earlier by spray pyrolysis deposition. This finding is significant for the fabrication of DSSCs, SSDSSCs and